Goudsmituk 02890 271001

 

  • Main

  • about

  • PrODUCTs

  • services

  • design

  • downloads

  • contacts

  • injection mouldings
  • extruded plastic
  • foam products

 

DID YOU KNOW?

  • → Polymers can be modified to make them UV stable, flame retardant or filled with glass fibre, bead or talc to altermechanical performance.Goudsmit UK also manufacture clear products from highly polished tools, using polymers such as PC, and PS. Furthermore we can mould rubber materials such as EPDM,Silicone and Nitrile rubbers and Neoprene to name a few.

 

    GOUDSMIT UK
    10 Cromac Place
    The Gasworks
    Belfast BT7 2DH

    Tel: +44 (0) 2890 271001
    Fax: +44 (0) 2890 271002

 

plastics - Injection mouldings

Goudsmit UK specialise in the volume manufacture of thermoplastic injection moulded components. We offer the following capabilities.

BROCHURE DOWNLOAD »

DESIGN, DEVELOPMENT & INDUSTRIALISATION

.....



We will take your design and if required provide the following: 3D model / 2D tolerance drawings / Analysis of fits /Addition of assembly features / Draft angles / Tool finish Location of splits / Ejector pins / Gate positions / Date wheels / Part number Define colour / Stability / Finish Analysis of wall thickness / Flow / Sinkage

FEA ANALYSIS


For some products mould fill and mechanical performance are essential.We run a full FEA suite so we can firstly perform mould flow to see how a par twill fill and to see if it will sink post injection. Subsequently we can analyze how a part will behave if loaded, for example, with a simple mechanical load or under pressure perhaps in a hydraulic system. We can also perform thermal analysis to identify how the part will react at temperature and how the polymer will perform.

 

 

 

TOOLS FOR THE JOB




Goudsmit UK does not manufacture its tools, we prefer to leave this to specialists. However tools are manufactured to a high standard and are maintained for free and guaranteed for a million shots. All are made from hardened tool steel. Complex tools are not an issue so slides, rotating cores and hot runner systems are commonly used. Gating is typically sprue but edge, film, diaphragm and tunnel are all possible. For ejection, pins are normally used however sleeve, blade and stripper plates can be used where required.

,

 

 

 

 

.